How to apply:

Step 1: Prepare your nails carefully.
Matt the top layer, tips, corners and edges of your nails with the Prep side (240) of the PRObuffer. Then slightly dampen a cellulose pad with Prep & Finish Cleaner and wipe your nails clean.

Step 2: Apply base coat.
Starting at the tip of the nail, work a thin layer of base coat into the nail plate in a sliding motion. Smooth out and allow to cure under the PROlamp for 60 seconds.

Step 3: Apply nail colour.
Apply an even layer of colour, taking care to seal the tip of the nail. Allow the nail colour to cure under the PROlamp for 60 seconds. For more coverage, volume and optimum durability, repeat with a second coat of nail colour.

Step 4: Apply top coat.
Apply a layer of top coat, making sure to seal the tip of the nail well. Allow to cure under the PROlamp for 90 seconds.

Step 5: And you’re done.
Clean your nails with a cellulose pad with Prep & Finish Cleaner to remove the tacky layer*. We recommend waiting around a minute once the top coat has cured before carrying out this step.

Please note: Should any product get onto your cuticle during application, be sure to remove it before curing, with a cuticle stick for example.

*A tacky layer is produced through the hardening of the nail polish and is necessary for the adhesion of the different layers. It should only be removed once the application is complete. Even when the polish is fully cured, it will still feel wet due to this layer.

This product is part of our plantPRO Gel Nail System. Here you can find all manicure steps and tutorials.

gitti Conscious Beauty News.

Subscribe to our newsletter and you will receive 15% off your next order.

Pay by

Visa
PayPal
Amazon
Mastercard
Apple Pay
Klarna
SOFORT
Shop Pay

Pay by

Visa
PayPal
Amazon
Mastercard
Apple Pay
Klarna
SOFORT
Shop Pay